Your Cart is Empty
You are $99.00 away from free shipping!
$349.95
$349.95
It takes a bold and capable design to bear our name, which is precisely what you'll find in the Jackson Leather Sherpa Vest. Inspired by the high mountain valleys of the Bison State—where cold mornings demand real warmth and the landscape rewards those tough enough to show up—the Jackson was built for men who work with their hands and live by their word. True to our brand and story, it showcases quality craftsmanship blended with a rugged vintage appeal through each and every stitch.
The open-arm two-tone Western yoke exterior pairs rich tan and brown full grain lambskin leather with a sherpa-lined interior that extends through the classic fold-over collar. Whether you're throwing it on over a worn-in flannel for a morning on the ranch, layering it under a coat for a cold-weather drive, or wearing it out with friends on a Saturday night, the Jackson Leather Sherpa Vest distinctively showcases an authentic western appeal—from the barn to the backcountry and everywhere in between.
The Jackson Leather Sherpa Vest by Buffalo Jackson is crafted from 100% full grain lambskin leather with a vintage distressed finish, giving it a broken-in look from day one that only improves with wear. The two-tone Western yoke design sets it apart visually, while the full sherpa polyester lining and sherpa-lined fold-over collar provide genuine warmth—not just style. It's a vest built for real use, not costume wear.
The Jackson Vest is designed for men who appreciate Western heritage and quality leather craftsmanship. It works equally well on a ranch, at a bonfire, layered under a coat for winter errands, or worn over a flannel for a casual night out. If you want a leather vest that looks authentically rugged without trying too hard, the Jackson fits that bill.
Yes. The Jackson Leather Sherpa Vest features a full 100% polyester sherpa lining that extends through the body and up through the fold-over collar, providing real insulation against cold. It works well as a standalone layer in cool weather or as a mid-layer under a heavier coat in winter. The leather exterior also acts as a natural wind barrier.
The Jackson Leather Sherpa Vest draws its design from the high mountain valleys of Wyoming—the Bison State—where Western working vests have been a staple for generations. The two-tone yoke pattern reflects classic Western tailoring, while the sherpa collar and lining nod to the warmth demands of cold-morning ranch work. Buffalo Jackson built it to carry that heritage into everyday modern wear.
The Jackson Vest is versatile enough for both Western and casual everyday styling. Pair it with a flannel and jeans for a classic Western look, or throw it over a henley or crewneck sweater for a more understated, rugged-casual outfit. The vintage-finished leather and two-tone design give it enough character to stand on its own without looking like a costume piece.
Full grain lambskin is the highest quality leather you can get—it retains the complete natural grain surface, which means it develops a rich patina over time rather than peeling or cracking like bonded or corrected-grain leather. Lambskin is also naturally softer and more supple than cowhide, so the Jackson Vest feels broken-in from day one while maintaining its structure and durability for years of hard wear.
The Jackson Leather Sherpa Vest is crafted from 100% full grain lambskin leather with a vintage distressed finish that gives it a naturally aged, broken-in appearance from the first wear. The leather weighs 1.2 oz—light enough for all-day comfort but substantial enough to block wind and hold its shape. The two-tone Western yoke in tan and brown creates a classic silhouette rooted in Western heritage.
The front closes with a heavy-duty YKK zipper running top to bottom, backed by an optional button-down snap flap for a clean, traditional look. Twin front open pockets sit at the waist for easy hand access, and interior left and right chest pockets—one zippered, one open—keep your essentials secure without adding bulk.
Inside, the full sherpa-style polyester lining runs through the entire body and extends through the fold-over collar, delivering real warmth without the weight. Every detail is finished with antique brass hardware that complements the vintage aesthetic of the leather and adds lasting durability at every stress point.
The Jackson Vest is made from 100% full grain lambskin leather with a vintage distressed finish. Full grain means the leather retains its complete natural surface—no sanding or correcting—which allows it to develop a deeper patina with age. At 1.2 oz weight, the lambskin is soft and supple from day one while remaining durable enough for years of regular wear.
For regular care, wipe the leather with a soft dry cloth to remove dust and surface dirt. Every few months (or as needed), apply a quality leather conditioner to keep the lambskin supple and prevent drying. Avoid soaking the vest or using harsh chemicals. Store it on a wide hanger in a cool, dry place to maintain its shape. Buffalo Jackson also offers leather care products designed specifically for their products.
The Jackson Vest is built from full grain lambskin leather—the most durable grade of leather available—reinforced with antique brass hardware and YKK zippers at every closure point. While it's not designed as heavy-duty workwear, it handles ranch work, outdoor chores, firewood splitting, and similar rugged use without issue. The vintage distressed finish actually means scuffs and wear marks blend in and add character.
Yes. Full grain lambskin leather naturally darkens with handling, body oils, and sun exposure, developing a rich patina that's unique to each vest. The vintage distressed finish on the Jackson means it already has an aged character from day one, and that character deepens over months and years of wear. This is a feature of quality leather, not a defect—the vest genuinely looks better with age.
The Jackson Vest features a full 100% polyester sherpa lining throughout the body and extending through the fold-over collar. This isn't a thin decorative liner—it's a thick sherpa that provides genuine insulation and warmth. The polyester material is also durable, resists pilling, and holds up well through regular wear without losing its loft.
| Sizes Available | S, M, L, XL, XXL, XXXL |
| Fit | True to size |
| Closure | YKK zipper front with button snap overlay |
| Exterior Pockets | 2 front open hand pockets |
| Interior Pockets | 2 chest pockets (1 zippered, 1 open) |
| Origin | Handcrafted in India |
| SKU | SAL22-V |
| Measurement | S | M | L | XL | XXL | XXXL |
|---|---|---|---|---|---|---|
| Body Chest Size | 38–40" | 40–42" | 42–44" | 46–48" | 48–50" | 50–52" |
| Shoulder to Shoulder | 18½" | 19" | 19½" | 20" | 20½" | 21" |
| Back Length (Below Collar) | 24½" | 25" | 25½" | 26" | 26½" | 27" |
| Waist | 34–36" | 36–38" | 38–40" | 40–42" | 42–44" | 44–46" |
Chest: Measure the full circumference of your chest at the fullest point, about 1 inch below the armhole. Wrap the tape under your armpits and around your shoulder blades. For lighter layers underneath (t-shirt, dress shirt), add 2–3 inches to your chest measurement. For heavier layers (sweaters, flannels), add 3–4 inches. If you fall between sizes, size up.
Shoulders: Measure between the top of the sleeve seams. Leather vest rules differ from suit coats—it's fine if the shoulder comes down your arm a bit. If the shoulder seam sits above your natural shoulder, the vest is too small.
Length: Measure from the bottom of the collar to your waist seam. The bottom of the vest should not extend well below your belt line.
Tip: Leather will stretch slightly over time, so start with a snug (but not tight) fit. You should be able to zip it all the way up comfortably, even if you plan to wear it open.
Yes, the Jackson Leather Sherpa Vest runs true to size. Buffalo Jackson recommends measuring your chest at its fullest point and adding 2–3 inches if you'll layer over lighter shirts, or 3–4 inches for heavier layers like sweaters and flannels. If you fall between sizes, size up. The lambskin leather will stretch slightly with wear, so start snug rather than loose.
The back length of the Jackson Vest (measured from below the collar to the hem) ranges from 24½ inches in a Small to 27 inches in a XXXL. This hits at or just above the belt line for most men, which is the ideal length for a leather vest. If the vest hangs well below your belt, you likely need a smaller size.
Yes. Full grain lambskin leather naturally stretches and molds to your body over time, so Buffalo Jackson recommends starting with a snug (but not tight) fit. The vest will loosen slightly through the chest and shoulders with regular wear, conforming to your shape for a custom-feeling fit after the first few weeks of use.
Yes. Buffalo Jackson provides prepaid shipping labels on all exchange requests, so if you receive your Jackson Leather Sherpa Vest and need a different size, you can exchange it at no additional shipping cost. The company recommends checking the detailed size chart and fit advice before ordering to get the best fit on the first try.
Features
Shopping online, as most of us do nowadays, you’ll want to know your measurements to help ensure a great fit. The sketch below shows where to take measurements to compare to clothing you already own. Keep in mind, however, those measurements will only be helpful if taken correctly. Tip: don’t let the measuring tape hang loose when you’re measuring, but avoid pulling the tape excessively tight. Here’s how to get accurate measurements:
Length: Measure from the bottom of the collar to the waist seam.
Shoulders: Measure between the top of the sleeve seams.
Chest: Measure the entire circumference of your chest. Begin with one end of the measuring tape 1 inch below the armhole at the fullest part of your chest. Then, keeping the tape level, wrap it around (under your armpits, around your shoulder blades, and back to the front) to get the measurement.
Do the same rules apply to how a jacket should fit as to other jackets or outerwear? Not necessarily. Read on for details.
Leather will stretch over time, so you never want to start with a leather jacket that is too big. But that doesn’t mean you want a jacket that’s too small! It’s also essential to allow room for layers under your leather jacket. Here are a few specific tips for finding a leather jacket that fits just right:
Chest: Leather jackets ought to fit more snugly through the chest than a regular overcoat, but consider the types of layers you may want to wear underneath. If you live in a warm climate and will be layering over light clothing such as a dress shirt or t-shirt, we recommend adding 2-3 inches to your measured chest size. If you live in a colder climate and layering over heavier clothing such as sweaters, we recommend adding 3-4 inches to your chest size. If you land between sizes, we recommend sizing up to the next size available. Tip: you should be able to comfortably zip or button your leather jacket all the way up, even if you plan to wear it open.
Shoulders: Suit coat rules do not apply to leather jackets, so it's okay if the shoulder comes down your arm a few inches. However, even though the leather will give over time if the shoulder seam is higher than your shoulder, the jacket is too small.
Waist: The bottom of your leather jacket should not reach below the bottom of your belt/top of your thigh. This is likely shorter than other overcoats you've owned, but a leather jacket that hangs well below the belt is too big unless you're wearing a long leather trench coat.
https://buffalojackson.com/blogs/insight/how-should-a-leather-jacket-fit
In addition to our size charts, please click on our new app that asks a few personal questions about you to help with your size choice:
If you receive your purchase and need to exchange it for a different size, we now provide prepaid shipping labels on all exchange requests.
| SKU | SAL22-V |
| Fit Advice | Vest sizing may vary depending on color, style and material of each vest. Please refer to individual size charts and fit advice tab.
|
| Origin | Made in India |
| Jackson Leather Sherpa Vest, Tan & Brown | ||||||
|
|
S | M | L | XL | XXL | XXXL |
| Body Chest Size | 38-40" | 40-42" | 42-44" | 46-48" | 48-50" | 50-52" |
| Shoulder to Shoulder | 18 1/2" | 19" | 19 1/2" | 20" | 20 1/2" | 21" |
| Vest Back Length (Below Collar) |
24 1/2" | 25" | 251/2" | 26" | 26 1/2" | 27" |
| Waist | 34-36" | 36-38" | 38-40" | 40-42" | 42-44" | 44-46" |
